Features:

    Tinted status bar
    External storage as primary storage / default write disk (Storage fix v3)
    Store data of whatsapp, game, backup, etc in external SD card
    Stock launcher with 15 lollipop material wallpapers
    Lollipop icons
    Dolby Digital sound
    Rooted with SuperSU v2.46
    Preinstalled Xposed Installer 3.0 alpha2 with 8 recommended modules
    Amplify, Greenify, BootManager, Battery Calibration for better battery backup
    Haptic feedback disabled in vibration mode
    Google search bar removed from recent apps
    Fixed bootanimation memory leak and color fade memory leak
    Philz recovery as default recovery

Requirements:

     BetterL_v2.1.zip 
   

    GravityBox (XDA)http://forum.xda-developers.com/showpost.php?p=60283703
    Drivers

   (Download)http://www.datafilehost.com/d/fd92e02d

   (How to install drivers)http://www.micromaxunite2.net/2014/08/how-to-install-drivers-for-unite-2.html
    SP Flash Tool (Download)http://forum.xda-developers.com/showthread.php?t=2650125

Bugs:

    Apps can't be moved to external SD card as App2SD is not supported in Lollipop 5.0. However you can link apps and app's data to external SD card 2nd partition using link2sd app.
    There's no video call option in dialer. You can video call by using apps like google hangouts, skype, etc.
    Reboot function may power off phone instead of reboot. Remove charger and press power button to power on phone

Make Backup before flashing:

    NVRAM Backup

How to create NVRAM/IMEI backup

http://micromaxunite2.net/2014/08/how-to-create-nvram-backup.html

Flashing Steps:

Step 1: Unzip downloaded files in PC using 7-Zip, WinZip, WinRar, etc

Step 2: Open SP flash tool and click the Scatter-loading button

Step 3: Select MT6582_Android_scatter.txt from downloaded BetterL folder

Step 4:
a) Select Firmware Upgrade from drop-down menu.
Make sure all 11 files are loaded as shown in below screenshot. If any file failed to load automatically then load that file manually by clicking Location (last) column of that file.
b) Remove battery from phone for few seconds then insert battery (Don't switch on)
c) Click Download button in SP flash tool
d) Connect phone via USB cable in switched off mode
e) Wait for 6-8 minutes to complete flashing.
If phone starts charging battery it means phone is not detected by SP flash tool. Click Stop button in SP flash tool. Remove USB cable. Make sure MediaTek/preloader drivers are installed properly. Reinsert battery, click download then connect phone via USB cable. If still doesn't respond then try flashing without battery.

Step 5: After successful flashing you'll see a message with green circle. Now remove USB cable and switch on phone normally by pressing power button. Wait few minutes for 1st boot. Phone may reboot 3-4 times during app optimization.

Step 6: After finishing setup, open SELinuxModeChanger app from app drawer and GRANT root permission. Tap Permissive to enable selinux permissive mode. This is required for dolby digital and some xposed modules to work properly. – See more at: http://www.micromaxunite2.net/2015/04/betterl-rom-for-micromax-a106-unite-2.html#sthash.ySF3LCYb.dpufStep 6: After finishing setup, open SELinuxModeChanger app from app drawer and GRANT root permission. Tap Permissive to enable selinux permissive mode. This is required for dolby digital and some xposed modules to work properly.

Step 7:
a. Install GravityBox.apk
b. Open Xposed Installer -> Modules. Select all modules (or which you want to enable)
c. Open Xposed Installer -> Framework and tap Soft reboot. GRANT root permission if asked. Soft reboot is required after enabling/disabling modules.

post link http://www.micromaxunite2.net/2015/04/betterl-rom-for-micromax-a106-unite-2.html

FOLLOW ME ON FACEBOOK

                                               https://www.facebook.com/biswajitmajumdar00

                                                      select all yellow letters

Flashing Steps:

 

 

Step 1: Unzip downloaded files in PC using 7-Zip, WinZip, WinRar, etc

 

Step 2: Open SP flash tool and click the Scatter-loading button

 

Step 3: Select MT6582_Android_scatter.txt from downloaded BetterL folder
 

Step 4:
a) Select Firmware Upgrade from drop-down menu.
Make sure all 11 files are loaded as shown in below screenshot. If any file failed to load automatically then load that file manually by clicking Location (last) column of that file.
b) Remove battery from phone for few seconds then insert battery (Don't switch on)
c) Click Download button in SP flash tool
d) Connect phone via USB cable in switched off mode
e) Wait for 6-8 minutes to complete flashing.
If phone starts charging battery it means phone is not detected by SP flash tool. Click Stop button in SP flash tool. Remove USB cable. Make sure MediaTek/preloader drivers are installed properly. Reinsert battery, click download then connect phone via USB cable. If still doesn't respond then try flashing without battery.

 

 

Step 5: After successful flashing you'll see a message with green circle. Now remove USB cable and switch on phone normally by pressing power button. Wait few minutes for 1st boot. Phone may reboot 3-4 times during app optimization.
 

 

 

Step 6: After finishing setup, open SELinuxModeChanger app from app drawer and GRANT root permission. Tap Permissive to enable selinux permissive mode. This is required for dolby digital and some xposed modules to work properly.

 

 

Step 7:
a. Install GravityBox.apk
b. Open Xposed Installer -> Modules. Select all modules (or which you want to enable)
c. Open Xposed Installer -> Framework and tap Soft reboot. GRANT root permission if asked. Soft reboot is required after enabling/disabling modules.
 

 

 

- See more at: http://www.micromaxunite2.net/2015/04/betterl-rom-for-micromax-a106-unite-2.html#sthash.ySF3LCYb.dpuf